White Reflective PET Film is one of the most advanced materials developed to improve lighting effectiveness. Owning a special multi-layer fabrication technology, this White Reflective PET Film for LED Lighting provides a strong and highly reflective surface. The three-layer structure consists of an upper and lower layer which are both made of PET film to add mechanical strength and C toughness, while in-between lays a micro-bubble patterned layer to boost reflectivity. Made of optical-grade PET raw materials and highly accurate scientific multilayer finishing, the film possesses great reflective quality and reliability for LED lighting applications. As a reputable China White Reflective PET Film supplier, we apply cutting-edge solutions and guarantee high-quality output so as to satisfy the various needs of customers. If you’re looking for a Blooming White Reflective PET Film Supplier, we provide reliable solutions for enhancing the utilization of lights.
White Reflective PET Film for LED Lighting
PET reflective film enable high efficiency reflection of light from a luminaire Reflective rate in excess of 94% is typical, which can help enhance the lighting efficiency.
Less surface defects,Enhanced flatness,High reflectivity, high luminance,Stable to heating
Normally large quantity stock available, can be cut into any size and shape base on customer’s requirement.
The PET Reflective film can be sticked with adhesive tape such as 3M brand & Crown
Dimension:
The standard size is 1200*1000000mm, the coil Diameter is 650mm
Dimension（L×W×T） | ||||
（μm ） Typical Thickness | (mm) Width | (M) Length | (mm) Coil Diameter | （mm） Tubecore diameter |
225 | 1200mm | 1000 | 650 | 160 |
PET Reflective Film properties:
Item | Unit | Value | Test Method |
（Thickness) | μm | 225μm±10 | GB/T 6672-2001 |
Tensile Strength MD/TD
| MPA | 75/70 | GB/T 13542.4-2009 |
Elongation at Break MD/TD
| % | 80/67 | GB/T 13542.4-2009 |
Thermo Shrinkage MD/TD | % | 0.20/0.05 | GB/T 13542.4-2009(85℃,30min) |
Surface Glossy, 60° | GU | 50 |
GB/T 9754-2007 |
Reflectivity | % | >94% | GB/T3979-2008 |
PET reflective film being widely used for the panel light, usually it’s used with LGP , which be located on the back surface of LGP and with the diffuser sheet before the LGP, total three layer piled up to achieve the best performance and best lighting quality.
